Complete List of Default Brother Printer Admin Passwords –

Setting up or troubleshooting a Brother printer often requires administrative access, either via the web portal or directly on the printer panel. If you’ve never changed these credentials, the device is likely still using the default admin password.

Below is a comprehensive table of default Brother printer admin passwords to help you log in and configure your device. This list applies to most Brother printers, including MFC, DCP, HL, and other popular models.

Table of Contents

Default Brother Admin Credentials Table

Model Series	Web Admin Username	Web Admin Password	Printer Panel Username	Printer Panel Password
HL Series	admin	access	admin	access
DCP Series	admin	access	admin	access
MFC Series	admin	access	admin	access
All Models (if label is present)	admin	Use password from printer label (e.g., `initpass`)	admin	Use label password or `access`
Older Models	admin	`access`, `0000`, or blank	admin	`access`, `0000`, or blank

🔒 Note: On many newer models, the default password is listed on a sticker labeled Init Password located on the back or bottom of the printer.

Where to Find the Brother Printer Default Password

Check the Label: Look for a sticker labeled Init Password near the network port or under the printer body.
Try Defaults: If no label is found, try common defaults: access, admin, 0000, or leave the field blank.
Web Portal Login: Open a browser, enter the printer’s IP address, and use the credentials listed above.

Why You Should Change the Default Password

Leaving the default credentials active poses a serious security risk. Once logged in, an attacker could:

Reconfigure printer settings
Monitor or intercept documents
Launch internal network attacks

Always change the default password after setup and store credentials securely.

Resetting Brother Admin Passwords

If you’ve changed the password and forgotten it, you may need to reset the printer to factory settings:

Access the printer’s panel.
Navigate to Initial Setup > Reset > All Settings.
Confirm and reboot the printer.

Caution: This will erase all configurations including Wi-Fi, print queues, and scan destinations.

Conclusion

This list of Brother printer default admin passwords will help you quickly access your device during setup or troubleshooting. Be sure to secure your printers by updating the default credentials and documenting changes for future reference.